Preventing Running While Unloaded; Continuing Ironing After A Power Outage; Fault Messages - Miele Marine PRI318 Gebrauchs- Und Aufstellanweisung

en - Using the ironer

Preventing running while unloaded

If you interrupt the ironing process for a certain period of time, press the  button to enter
pause mode or alternatively press the  button to switch off the ironer. This prevents any
unnecessary running while unloaded (i.e. the ironer operating without laundry) and means
that much less strain is exerted on the ironing cloth and the drive.
If the ironer is operated while unloaded over an extended period of time, this will result in
the roller covering having a significantly shorter service life.

Continuing ironing after a power outage

After a power outage, press the  button.

The flatwork ironer is switched back on.
Activate the finger guard.

Press the  button.

Ironing can then be resumed.

Fault messages

When a fault occurs, ironing is interrupted and the  button flashes. A four-digit fault code
is then shown on the display (e.g. ). Pressing the flashing  button acknowledges the
fault (the fault is stored in the fault memory). The  button flashes and ironing can then
be restarted.
If the fault message appears again, repeat the process or switch the ironer off before
switching it back on again. If the fault persists, call the Miele Customer Service Depart-
ment.
In the event of malfunctions, please alert the Miele Customer Service Department.
64