Miele Marine PRI318 Gebrauchs- Und Aufstellanweisung Seite 66

en - Cleaning and care
a
Pocket
b
Cleaning strip
Lay the cleaning cloth on the left side of the feed table with the cleaning strip facing the

heater plate.
Feed the cleaning cloth evenly and straight from the left side of the infeed table through

the ironer until it comes all the way out on the other side.
The cleaning strip loosens the soiling. The softer cotton strip removes the soiling and pol-
ishes the heater plate.
Feeding the cleaning cloth through the ironer from the left to the right side
Now lay the cleaning cloth back on the feed table, but this time move it slightly to the

right. The cleaning strip must again face the heater plate.
Feed the cleaning cloth through the ironer again.

Repeat the process until you reach the right side of the feed table and the entire width of

the heater plate has been cleaned.
Press the  button to end the cleaning programme.

It is essential to wax the heater plate after cleaning.
You can then switch directly to the waxing programme by pressing the temperature selec-
tion button  on the right or exit the cleaning programme by pressing and holding the
 button for at least 3 seconds.
66
1 .
2 .
3 .
①
②
③
c
Cotton strip