3. Fit the rails to the insides of the side columns
Fit one side of the rails to the inside of the corresponding side column. Screw the rail
from what was the original left-hand side column to the inside of the right-hand side
column. Screw the rail from what was the original right-hand side column to the inside of
the left-hand side column.
Rail fitted to the left-hand side column
The screw at the top on the inside of the side column should only be attached loosely.
It needs to protrude slightly so that the laundry outfeed table can hook onto the screw
thread in the next step.
Undo the screw located slightly further in as well.
en - Installation and connection
75