Electrolux WTSL 4E200 Benutzerinformation Seite 8

8 electrolux
G
H
I
J
Dryness level symbols: they come on when you set an automatic drying
K
L
M
Graphic bars
If you make a wrong selection the message Err indicates that the selection is not possible.
N
O
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• The 'Rinse Hold' function is on.
• There is water in the drum.
The child safety lock symbol comes on when this device is activated.
The delay start symbol comes on when you set the delay start func-
tion.
• The programme time (washing and/or drying phase)
When the programme starts, the programme time decreases with
steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay
start time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes.
Refer to 'Troubleshooting'.
• The display shows this message for some seconds when:
– You cannot set a function with the washing programme.
– You try to change the washing programme while it operates.
• When the programme is completed.
Extra dry level symbol
Store dry level symbol
Iron dry level symbol
The drying time symbol comes on when you set the a drying pro-
gramme.
The detergent overdosing symbol comes on at the end of the cycle
when the appliance detects too much detergent.
The empty indicator bar appears only if the related function is availa-
ble for the set programme.
The indicator bar fills accordingly to the set functions.
The time save symbol comes on when you set one of the pro-
gramme duration.
• Shortened time
• Extra Quick
The extra rinse symbol comes on when this function is activated.