Threading The Lower Looper Thread - Texi Integra 5 Benutzerhandbuch

THREADING THE LOWER LOOPER THREAD

Note: Please use the tweezers in accessories box to help threading.
Turn the hand wheel toward you until the
lower looper reached the rightmost position.
According to color
threading diagram,
Follow the 5-8 steps
(go down).
Tip: For 3-thread overlock and 3-thread decorative
overcasting, the stitch will be more beautiful if not
threading through step 8.
Texi Integra 5 INSTRUKCJA 2019-ALL.indb 95
Rightmost
position
According to the
figure, the thread
from the right behind
the embedding gap
inside (B).
Texi Integra 5
Follow the 1-11 steps.
Guide the thread The thread from
through hole (9). front to back
through the hole
(C), be careful: The
thread must be
stuck in the groove.
Pull about 10cm of
thread through the
lower looper hole
and put it under the
presser foot.
EN
95
17.09.2019 11:58