General Notes - STAMOS S-WIGMA 180 Bedienungsanleitung

6. ENTSORGUNG DER VERPACKUNG
Wir bitten Sie, das Verpackungsmaterial (Pappe,
Plastikbänder und Styropor) aufzubewahren, um im
Servicefall das Gerät bestmöglich geschützt zurücksenden
zu können!
7. TRANSPORT UND LAGERUNG
Beim Transport sollte das Gerät vor Erschütterung und
Stürzen geschützt werden. Das Abstellen von Dingen auf
den oberen Teil des Gerätes sollte vermieden werden.
Lagern Sie die Schweißmaschine in einer gut durchlüfteten
trockenen Umgebung ohne korrosive Gase.
8. REINIGUNG UND WARTUNG
• Ziehen Sie vor jeder Reinigung und
Nichtbenutzung des Gerätes, den Netzstecker und
lassen Sie das Gerät vollständig abkühlen.
• Verwenden Sie zum Reinigen der Oberfläche
ausschließlich Mittel ohne ätzende Stoffe.
• Lassen Sie nach jeder Reinigung alle Teile gut
trocknen, bevor Sie das Gerät erneut verwenden.
• Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschützten Ort auf.
9. REGELMÄSSIGE PRÜFUNG DES GERÄTES
Prüfen Sie regelmäßig, ob Elemente des Gerätes
Beschädigungen aufweisen. Sollte dies der Fall sein, darf
das Gerät nicht mehr benutzt werden. Wenden Sie sich
umgehend an Ihren Verkäufer um Nachbesserungen
vorzunehmen.
Was tun im Problemfall?
Kontaktieren Sie Ihren Verkäufer und halten Sie folgende
Angaben bereit:
• Rechnungs – und Seriennummer (letztere finden Sie
auf dem Typenschild).
• Ggf. ein Foto des defekten Teils.
• Ihr Servicemitarbeiter kann besser einschätzen worin
das Problem besteht, wenn Sie es so präzise wie
möglich beschreiben. Je detaillierter Ihre Angaben
sind, umso schneller kann Ihnen geholfen werden!
ACHTUNG: Öffnen Sie niemals das Gerät ohne
Rücksprache mit dem Kundenservice. Dies kann Ihren
Gewährleistungsanspruch beeinträchtigen!
DE
bei
6 Rev. 16.03.2018
U S E R M A N U A L
The operation manual must be read carefully.
The product must be recycled.
Satisfies all the applicable safety standards.
Use full body protective clothes.
Attention! Wear protective gloves.
Safety goggles must be worn.
Protective footwear must be worn.
Attention! Hot surface may cause burns.
Attention! Risk of fire or explosion.
Attention! Harmful fumes, danger of poisoning.
Gases and vapours may be hazardous to health.
Welding gases and vapours are released during
welding. Inhalation of these substances may be
hazardous to health.
Use a welding mask with appropriate filter
shading.
CAUTION! Harmful welding arc radiation.
Do not touch any parts that are under voltage/
power.
PLEASE NOTE! The drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
1. SAFETY OF USE

1.1 GENERAL NOTES

• Take care of your own safety and the one of third
parties by reviewing and strictly following the
instructions, included in the operating manual of the
device.
• Only qualified and skilled personnel can be allowed
to start, operate, maintain and repair the machine.
• The machine must never be operated contrary to its
intended purpose.
1.2 PREPARING THE WELDING WORK SITE
WELDING OPERATIONS MAY CAUSE FIRE
EXPLOSION.
• Strictly follow the occupational health and safety
regulations applicable to welding operations and
make sure to provide appropriate fire extinguishers
at the welding work site.
• Never carry out welding operations in flammable
places that pose the risk of material ignition.
• Never carry out welding operations in an atmosphere
containing flammable particles or vapours of
explosive substances.
• Remove all flammable materials within 12 meters
from the welding operations site and if removal is
not possible, cover the flammable materials with fire
retardant covering.
• Use safety measures against sparks and glowing
metal particles.
• Make sure that sparks or hot metal splinters do
not penetrate through the slots or openings in the
coverings, shields or protective screens.
Rev. 16.03.2018
EN
• Do not weld tanks or barrels that contain or have
contained flammable substances. Do not weld in the
vicinity of such containers and barrels.
• Do not weld pressure vessels, pipes of pressurised
installations or pressure trays.
• Always ensure adequate ventilation.
• It is recommended to take a stable position prior to
welding.
1.3 PERSONAL PROTECTION EQUIPMENT
ELECTRIC ARC RADIATION CAN CAUSE DAMAGE TO
EYES AND SKIN.
• When welding, wear clean, oil stain free protective
clothing made of non-flammable and
conductive materials (leather, thick cotton), leather
gloves, high boots and protective hood.
• Before welding remove all flammable or explosive
items, such as propane butane lighters or matches.
• Use facial protection (helmet or shield) and eye
protection, with a filter featuring a shade level
matching the sight of the welder and the welding
current. The safety standards suggest colouring
No. 9 (minimum No. 8) for each current below 300
A. A lower shield colouring can be used if the arc is
covered by the workpiece.
• Always use approved safety glasses with side
protection under the helmet or any other cover.
• Use guards for the welding operations site in order
to protect other people from the blinding light
radiation or projections.
• Always wear earplugs or another hearing protection
to protect against excessive noise and to avoid
spatter entering the ears.
• Bystanders should be warned to not look at the arc.
1.4. PROTECTION AGAINST ELECTRIC SHOCK
ELECTRIC SHOCK CAN BE LETHAL.
• The power cable must be connected to the nearest
socket and placed in a practical and secure position.
Positioning the cable negligently in the room and on
a surface which was not checked must be avoided as
it can lead to electrocution or fire.
• Touching electrically charged elements can cause
electrocution or serious burns.
• Electrical arc and the working area are electrically
charged during the power flow.
• The input circuit and inner power circuit of the
devices are also under voltage charge when the
OR power supply is turned on.
• The elements under the voltage charge must not be
touched.
• Dry, insulated gloves without any holes and
protective clothing must be worn at all times.
• Insulation mats or other insulation layers, big enough
as not to allow for body contact with an object or the
floor, must be placed on the floor.
• The electrical arc must not be touched.
• Electrical power must be shut down prior to cleaning
or electrode replacement.
• You must check if the earthing cable is properly
connected or the pin is correctly connected to the
earthed socket. Incorrect earthing connection can
cause life or health hazards.
• The power cables must be regularly checked for
damage or lack of insulation. Damaged cables must
be replaced. Negligent insulation repair can cause
death or serious injury.
• The device must be turned off when it is not in use.
7
non-