Examples Of Cooking Applications; Care And Cleaning; What To Do If - Zanussi ZDK320 Benutzerinformation

Examples of cooking applications

Heat
setting:
1
2
3

Care and cleaning

Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Before any maintenance or cleaning can
be carried out, you must disconnect the hob from
the electricity supply.
The hob is best cleaned while it is still warm, as
spillage can be removed more easily than if it is left
to cool.
Warning! Sharp objects and abrasive cleaning
agents will damage the appliance.
For your safety, do not clean the appliance with steam
blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic have
no effect on how the appliance operates.

What to do if...

Problem
The appliance does not operate.
The plate does not heat up.
Results of plate are not satisfactory.
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
Use to:
Keeping warm
Gentle simmering
Simmering
• Start the appliance again and set the heat setting in 10 seconds.
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
• Make sure that you plug in the appliance and switch the electrical supply.
• Make sure that you turn correct control knob.
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
• Make sure that plate is clean and dry.
• Make sure that the cooking pan is the correct size for the plate.
• Make sure that cooking pan has a flat bottom.
• Make sure that the setting is correct for type of cooking.
Heat
setting:
4
5
6 Bringing to the boil / quick frying / deep-
Removing the dirt:
1. – Remove immediately: melting plastic, plastic foil,
and food containing sugar. Use a special glass
ceramic scraper. Put the scraper on the glass ce-
ramic surface at an acute angle and slide the blade
on the surface.
– Stop the appliance and let it cool down before you
clean: limescale rings, water rings, fat stains, shi-
ny metallic discolorations. Use a special cleaner
for glass ceramic or stainless steel.
2. Clean the appliance with a damp cloth and some de-
tergent.
3. At the end rub the appliance dry with a clean cloth.
Possible cause and remedy
yourself, speak your dealer or the local Service Force
Centre.
Use to:
Frying / browning
Bringing to the boil
frying
13