Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. OPERATION
•
Each gas tap controls 1 radiant.
•
Press the upper gas valve switch for the first burning process and turn it counterclockwise to the "min flame"
position, hold the switch until flaming by holding the lighter or the match on the bottom of the radiant.
6. SAFETY PRECAUTIONS
•
Do not use the device without supervision/control. Always switch off the appliance when you leave the work
area.
•
Keep children away from the operating appliance. (Burning risk etc.)
•
Do not repair or replace the appliance while the appliance is operating.
•
As a safety system in the appliance, the safety valve cuts off the gas in the event that the tap flame or the
radiant goes out.
CAUTION: Do not clean the appliance with direct or high pressure water.
7. GENERAL SAFETY WARNINGS
Warning 1: The appliance should be operated under the chimney hood.
Warning 2: Any kind of combustible solid, liquid materials (clothes, alcohol, and derivatives, petrochemical
products, wooden and plastic materials, curtains etc.) should not be kept in the area where the appliance is
operated.
Warning 3: Do not clean with pressurized water.
Warning 4: The appliance is intended for industrial purpose and the appliance should be operated only by trained
personnel.
Warning 5: Do not interfere with the appliance other than the manufacturer or the authorized service.
Warning 6: In case of any fire or flame sparkles for any reason in the area where the appliance is operated,
use fire extinguishers by turning off gas valves and electrical switches (if any) without panic. Never use water to
extinguish the flame.
Warning 7: Never pour water on the appliance and turn off the gas valve while cleaning. Never interfere with the
appliance while the appliance is operating and the gas valve is open.
Warning 8: Unauthorized persons should not be allowed to repair the appliance.
Warning 9 The appliance has been manufactured for industrial purpose and should not be used for the wrong
purposes.
The appliance should be installed in accordance with the applicable regulations and should only be used
Refer to the instructions before installation and operation of the appliance.
INTENDED PURPOSE OF THE PRODUCT
The appliance has been manufactured for industrial purpose and should not be used for the wrong purposes.
The appliance is only for roasting purpose, and cannot be used for cooking.
Our company cannot be held responsible for problems arising from inappropriate use.
NOTE: DO NOT USE THE APPLIANCE FOR THE WRONG PURPOSES. THE APPLIANCE SHOULD BE OPERATED
BY A PERSON WHO KNOWS SAFETY AND TECHNICAL SPECIFICATIONS OF THE APPLIANCE AND HAS READ
in a well-ventilated place.
THE USER MANUAL.
www.combisteel.com
6
Werbung
Inhaltsverzeichnis
