Carrier 42QHF009DS Serie Bedienungsanleitung

INSTALLATION
CONTENTS
1. READ BEFORE INSTALLATION
Installation Diagram
2. INSTALLATION
Indoor Installation
Outdoor Installation
Wiring Work
Air Evacuation And Test Operation
INDOOR OUTDOOR DIMENSION(IN)
42QHF009DS* 38QUS009DS* 800x188x275
42QHF012DS* 38QUS012DS* 800x188x275
38QUS018DS*
42QHF018DS*
940x205x275
42QHF022DS* 38QUS022DS*
1045x235x315
This product has been determined to be in compliance with the Low Voltage Directive (2006/95
/EC),and the Electromagnetic Compatibility Directive (2004/108/EEC) of the European Union.
(Waste Electrical & Electronic Equipment)
(When using this air conditioner in European countries, the following guidance must be
followed)
- This marking shown on the product or its literature, indicates that waste electrical and electrical equipment(WEEE
as in directive 2002/96/EC) should not be mixed with general household waste.
It is prohibited to dispose of this appliance in domestic household waste.
For disposal, there are several possibilities:
1. The municipality has established collection systems, where electronic waste can be disposed at least free of
charge to the user.
2. When buying a new product, the retailer will take back the old product at least free of charge.
3. The manufacture will take back the old appliance for disposal at least free of charge to the user.
4. As old products contain valuable resources, they can be sold to scrap metal dealers.
Wild disposal of waste in forests and landscapes endangers your health when hazardous substances leak into
the ground-water and find their way into the food chain.
DIMENSION(OUT) POWER SUPPLY
780x250x540
810x310x558
220-240 ~ 50Hz
810x310x558
845x320x700
Correct Disposal of This Product
IMPORTANT
Installing, starting up, and servicing air-conditioning equipment can be hazardous
due to system pressures, electrical components, and equipment location (roofs,
elevated structures, etc.).
02
Only trained, qualified installers and service mechanics should install, start-up, and
04
serve this equipment.
When working on the equipment, observe precautions in the literature and on tags,
stickers, and labels attached to the equipment.
Follow all safety codes. Wear safety glasses and work gloves. Keep quenching cloth
05
and fire extinguisher nearby when brazing. Use care in handling, rigging, and setting
bulky equipment.
06
Read these instructions thoroughly and follow all warnings or cautions included in
07
literature and attached to the unit. Consult local building codes and National Electrical
08 Code for special requirement.
Refrigerant gas is heavier than air and replaces oxygen. A massive leak could lead
to oxygen depletion, especially in basements, and an asphyxiation hazard could
occur leading to serious injury or death.
If the refrigerant gas leaks during installation, ventilate the area immediately.
Refrigerant gas may produce a toxic gas if it comes in contact with fire such as from a fan heater, stove or cooking device. Exposure
to this gas could cause severe injury or death.
Disconnect from power source before attempting any electrical work. Connect the
connective cable correctly.
Wrongly connecting may result in electric parts damaged.
Do not ground units to water pipes, telephone wires or lightning rods.
Incomplete grounding could cause a severe shock hazard resulting in severe injury or death.
Safely dispose of the packing materials.
Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries. Tear apart and throw away
plastic packaging bags so that children will not play with them. Children playing with plastic bags face the danger of suffocation.
Do not install unit near concentrations of combustible gas or gas vapors.
Be sure to use the supplied or exact specified installation parts.
Use of other parts may cause the unit to come to lose, water leakage, electrical shock, fire or equipment damage.
WARNING