Herunterladen Inhalt Inhalt Diese Seite drucken

JVC KW-AVX730 Bedienungsanleitung Seite 8

Vorschau ausblenden Andere Handbücher für KW-AVX730:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Setting the lighting sensor
You can change the condition for turning off/on the
screen and the lights of the monitor panel buttons.
1
2
Setup
Demonstration
Wall Paper
3
Setup
Beep
Telephone Muting
Lighting Sensor
Motion Sensitiv.
Initialize
Setup
Beep
Telephone Muting
Lighting Sensor
Motion Sensitiv.
Initialize
Back
When any setting other than <Off> is selected,
the screen and/or lights of the buttons (except
) are turned off when no operation is done
for about 10 seconds.
The screen and/or the lights of the buttons are
turned off/on as follows.
AV Setup
Off
On
Ambient
Off
On
Off
Muting1
Muting2
Prox./Motion-LED
Mid
High
Enter
Off
Prox./Motion-LED
Touch Panel-LED
Prox./Motion-LCD
Touch Panel-LCD
Exit
Prox./
Monitor panel buttons are turned
Motion-LED
off. They light up when your
finger touches the touch panel
or your hand moves closer to the
Prox./Motion sensor.
Touch
Monitor panel buttons are turned
Panel-LED
off. They light up when your
finger presses any button on the
touch panel.
Prox./
The screen and the lights of the
Motion-LCD
monitor panel buttons are turned
off. They turn on when your
finger touches the touch panel
or your hand moves closer to the
Prox./Motion sensor.
Touch
The screen and the lights of the
Panel-LCD
monitor panel buttons are turned
off. They turn on when your finger
touches the touch panel.
Off
The screen and the lights of the
monitor panel buttons are always
turned on while the power is
turned on.
• Pressing any button on the monitor panel also
turns on the screen and/or the lights of the
buttons.
• In the following cases, the screen and/or the lights of
the monitor panel buttons are turned on regardless
of the <Lighting Sensor> setting:
– The buttons are lit up when <AV Menu>,
<Source Menu>, or <Open/Tilt> is displayed.
– The screen is turned on when a call/SMS comes in
(for Bluetooth mobile phone).
– The screen is turned on when the signal from the
rear view camera comes in.
To change the sensitivity of the sensor, see
"Motion Sensitiv." (
8
33)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis