JVC KW-AVX730 Bedienungsanleitung Seite 45

1
Make sure "NEW DEVICE" is selected. If not, press [
2
To register using <Open>
3
Open
Back
Go to other menu items
4
Change the PIN code.
• You can enter any number you like (1-digit to
16-digit number).
• If you skip changing PIN code, press [Enter].
PIN code (initial: 0000)
PIN Code
Back
[BS]: Erases the character before the cursor.
[Del]: Erases the character on the cursor.
Operate the Bluetooth device to connect while
"Open..." is displayed on the screen.
Enter the same PIN code (as entered in the above
step) on the device to be connected.
Now connection is established and you can use the device through the unit.
• The device remains registered even after you disconnect the device. Use <Connect> (or activate <Auto
Connect>, 51) to connect the same device from next time.
Bluetooth
Connect
Exit
Enter Exit
5 ∞
] or [ ] to select it.
To register using <Search>
3
Bluetooth
Dial Menu
Message
Open
Back
The unit searches for available devices and displays
the list of them. (If no available device is detected,
"Device Unfound" appears.)
4
Select a device you want to connect.
5
Enter the specific PIN code of the device
to the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
6
Operate the Bluetooth device to connect
while "Connecting..." is displayed on the
screen.
45
( 47)
NEW DEVICE
Search
Special Device
Connect
Exit