Alarm Settings - Emos E5005 Bedienungsanleitung

2. Set the desired altitude by pressing MEM or HISTORY. The settings range between -190 m to
2,000 m, with 10 m increments.
Atmospheric pressure – History
The station shows atmospheric pressure in hPa or inHg and keeps a history of pressure readings for
the last 12 hours in field no. 16.
Moving the weather station to another place will affect the measured values.
Measurement will stabilise within 12 hours of battery insertion or weather station moving.
Press the HISTORY button repeatedly to gradually display the pressure values for the last 12 hours.
The measured value + time difference will be displayed in fields no. 15, 16.
Information
After 20 seconds, the station will switch from settings mode back to standard mode once the setting
process is complete.
Temperature, Humidity and Pressure Trends
indicator for
temperature, humidity
and pressure trends
rising constant falling
Moon Phases
The moon phase is displayed in field no. 14.
Icons for the main phases of the moon are as follows:
waxing first waxing waning waning
new moon full moon last quarter
crescent quarter gibbous gibbous crescent
Displaying Maximum and Minimum Readings of Temperature and Humidity
Press the MEM button repeatedly to gradually display the maximum and minimum readings of
temperature and humidity.
Holding the MEM button while viewing MAX/MIN values will erase the memory.

Alarm Settings

2 alarms can be set on the weather station.
Pressing the MODE button will display the time for alarm A1. The selection will be shown in field no. 21.
While showing the alarm time, hold the MODE button and use MEM and HISTORY to set the
desired alarm time.
Activate the alarm by pressing MEM or HISTORY while displaying alarm time in field no. 21.
After activation, the alarm will be indicated by icon in field no. 19.
Pressing MEM or HISTORY again while displaying alarm time will deactivate the alarm and the
icon will disappear.
The same procedure is used for setting up alarm A2 (icon ).
Snooze and Display Backlight Functions (SNOOZE/LIGHT)
The alarm ringing can be delayed by 5 minutes using the SNOOZE•LIGHT button located on the top
part of the weather station.
Press the button when the alarm starts ringing. The alarm icon will be flashing.
To cancel the SNOOZE mode, press any other button – the bell icon will stop flashing and will remain
on the screen.
The alarm will be re-activated the next day.
7