Listening To External Source; Tone Control - Yamaha TSX-B141 Bedienungsanleitung

USING THE ALARM

LISTENING TO EXTERNAL SOURCE

Rear panel
1
Top/front panel
2
3
SOURCE
Front panel
2
LOW, MID, HIGH

TONE CONTROL

1 3
,
EQ
Set the unit to standby mode before connecting
audio cables.
1
Connect external audio device to AUX on
the rear panel using a commercially
available 3.5 mm (1/8 in) stereo mini plug
cable.
Note
Turn down the volume of the unit and your external
audio device before connection.
2
Press to turn the unit on.
3
Set SOURCE to AUX.
4
Start playback on the connected external
audio device.
1
Press EQ during playback.
LOW, MID and HIGH flash.
2
Adjust the tone with LOW, MID and
HIGH.
Each tone can be adjusted from –5 to +5.
3
Press EQ to complete.
15
En