Names Of Parts And Their Functions - Yamaha TSX-B15 Bedienungsanleitung

NAMES OF PARTS AND THEIR FUNCTIONS

■ Top panel
A VOLUME
Controls volume. When you
control the volume, the volume
level will be displayed on the
display for a while.
B CLOCK
Sets the clock (☞ page 4).
C ALARM
Sets the alarm (☞ page 4).
D TUNING
Adjust the time or radio frequency
(☞ page 4, 6).
E PRESET
Stores up to five favorite FM radio
stations (☞ page 6).
F SOURCE (PAIRING)
Selects an input source from
(Bluetooth), AUX, or RADIO.
G Display
H Indicators
(Alarm): Lights when the alarm
function is on (☞ page 4).
RADIO: Lights when the radio is selected
as an input source (☞ page 6).
AUX: Lights when AUX is selected as an
input source (☞ page 10).
(Bluetooth): Lights when ( ) Bluetooth
is selected as an input
source or during Bluetooth
pairing/connection
(☞ page 7, 9).
y
Dimmer function
Press CLOCK repeatedly to set the
brightness of the display and indicators.
3 (brightest) 2 1 (darkest)
2
En
J
Press to turn on the system or enter standby mode.
Eco Standby mode
• This can reduce power consumption. Press and hold
more than 3 seconds to set the system to power saving mode.
All the indicators and display turn off, and Bluetooth operation,
audio playback, input via buttons except
cancel Eco Standby mode, press
• Even in standby mode or Eco Standby mode, the alarm
function is available.
Auto Standby (☞ page 5)
• This unit has a function that automatically activates standby
mode when no audio signal is input from a connecting device,
or when the connecting device is playing at a low volume for a
certain period (about 20 minutes).
I Grille (☞ page 3)
for
are disabled. To
.