Operation; Front Panel And Basic Operation - Yamaha mcr 040 Bedienungsanleitung

OPERATION

FRONT PANEL AND BASIC OPERATION

y
• This unit has an automatic standby function, which will automatically switch the unit to standby mode if the unit is left turned on for
1 hour without playback or any other operation being performed. This function is not available when the source is set to PORTABLE/
FM.
• Press to set the unit to standby mode. All the information on the front panel display is not displayed in standby mode. This can
reduce power consumption. To turn on the unit, press
only).
• If the iPod selected as the input source is disconnected from the transmitter, or does not output sound for a certain period, the unit will
automatically switch to standby mode (MCR-140 only).
MCR-040
iPod dock
:
Unit standby/on
USB port:
☞ P. 5, 8
:
Connecting headphones
No sound is output from the speakers
when headphones are connected.
/ , or start playback with your iPod connected to the transmitter (MCR-140
iPod
VOLUME
USB PORTABLE
3.5 mm stereo mini
plug cable
PORTABLE:
Press the INPUT button repeatedly
to select PORTABLE. Then start
playback on the connected portable
audio device.
MCR-140
INPUT
INPUT button:
Press repeatedly to choose the input source.
VOLUME
Down
Charging cradle
Disc tray
:
Disc tray open/close
:
Play/pause playback
:
Stop playback
Up
7
En