Using Useful Functions; Using Setup Menu - Yamaha mcr 040 Bedienungsanleitung

Using setup menu

The setup menu appears on the front panel display by pressing SETUP. You can set various useful functions with setup
menu.
Setup menu
PRESET DELETE
DIMMER
TREBLE
BASS
BALANCE
1
AUTO CLOCK*
CLOCK SET
TIMER SET
MCR-140
WIRELESS SET
MCR-140
POWER SAVING
MCR-140
WIRELESS SW
1
* This function is available only for Europe, U.K. and Australia models.
1 2
Press SETUP. Select desired
setup menu.
2
* When there are some parameters to set, repeat steps 3 and 4. You can go back to a previous parameter by pressing
3
* To set additional items, repeat steps 2 to 5.
y
To cancel the setting during the operation, press SETUP.
■ Setting dimmer, tone/balance and power saving mode
DIMMER: Changes the brightness of the front panel display.
TREBLE *4 : Adjusts the high frequency response.
BASS *4 : Adjusts the low frequency response.
BALANCE: Adjusts the volume level of each left and right speaker channel.
POWER SAVING: If you set to ECO, you can reduce standby power consumption. However, you cannot turn on the
unit by playback operation on your iPod during standby mode. The default setting is NORMAL. This function is
available only for MCR-140.
WIRELESS SW: Set to YES when you use a subwoofer via the wireless subwoofer kit (SWK-W10, etc., sold
separately). The default setting is NO. This function is available only for MCR-140.
4
* Also effective when you are using headphones.

USING USEFUL FUNCTIONS

Parameter or control range
(Displays only when the input source is set to FM.)
DIMMER ON (25%)/OFF (100%)
–6 dB to +6 dB
–6 dB to +6 dB
L+5 - CENTER - R+5
ON/OFF
Hour, minute
Time (hour, minute), running time, sound (source, track or preset
number), timer on/off
GROUP A1/A2/A3/B1/B2/B3
NORMAL/ECO
NO/YES
3 4
Confirm with Change the settings.
ENTER.
2
Repeat*
Reference page
10
below
below
below
below
12
12
12
5
below
below
5 6
Complete the Exit setup
3
setting.* menu.
.
11
En