Using The Smart Timer; Setting The Smart Timer; Activating/Deactivating The Smart Timer - Yamaha LSX-700 Bedienungsanleitung

Using the SMART TIMER

The SMART TIMER allows you to turn on the lighting at the brightness you set and play back your favorite music as a wake-up timer every morning. You can also
turn off the lighting and stop music playback automatically while you are in bed listening to music.
What the SMART TIMER can do
On-timer
• Turn on the lighting at a specified time.
• Specify the brightness of the lighting.
• Play back the music of a connected device at a specified time.
• Specify a song.
• Preset the volume level.

Setting the SMART TIMER

SMART TIMER settings can be performed with a smart phone or tablet that has the DTA CONTROLLER
application ( P.7) installed.
1
Connect a device via
2
Start DTA CONTROLLER on the device and make the SMART TIMER settings.
3
Synchronize the SMART TIMER with the unit by DTA CONTROLLER.
• Be sure to synchronize the SMART TIMER with the unit every time you perform the SMART TIMER setting.

Activating/deactivating the SMART TIMER

Press on the unit or on the remote control.
• The
indicator lights up when the SMART TIMER is activated.
12
En
Off-timer
• Turn off the lighting at a specified time.
• Turn off the power at a specified time.
connection ( P.9, 10).
• To play back a song via Bluetooth connection at a
set time, it is required that the Bluetooth function
of your smart phone or tablet is turned on.
Additionally, in the case of an iPhone, do not quit
DTA CONTROLLER while multitasking.
• If another Bluetooth device is connected to the
unit at the time you set, the song you set as the
on-timer will not be played back. Disconnect any
other device before the time you set.
• The on-timer and off-timer of the SMART TIMER
can be activated/deactivated by DTA
CONTROLLER only.
• The SMART TIMER cannot be activated/
deactivated by pressing on the unit or remote
control if you do not set the SMART TIMER from
DTA CONTROLLER.
Inner clock of the unit
• The unit copies the time to the unit's inner clock
from DTA CONTROLLER when a device connects
to the unit via Bluetooth connection. The SMART
TIMER follows the unit's inner clock.
• The clock setting will be reset and the SMART
TIMER will be deactivated if the power cable is
kept disconnected from the wall outlet for about a
week.