Adjust Contrast; Background Illumination; Setting The Global Volume/Mute Switching - Silvercrest SFB 10.1 B2, Betriebsanleitung

3. In the LCD display q "TIME SETUP" appears. Press the 
button t to change to "DATE SETUP". Confirm with the
OK button l.
4. In the display the year "2011" blinks. With the  or
 button t you can change the year and confirm with
the OK button l. With the  or  button t you can
change the now blinking month and confirm with the OK
button l. Now the day indicator blinks which you can
also change with the  or  button t.
5. To save press the OK button l. The "DATE SETUP"
notice appears again.

Adjust contrast

You can set the display's contrast as follows:
1. Hold down the S button r for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears.
2. With the  or  button t select "SYSTEM SETUP" and
confirm with the OK button l.
3. With the  or  button t select "CONTRAST SETUP"
and confirm with the OK button l.
4. In the LCD display q the contrast value now blinks which
you can set with the  or  button t.
Display readout:
0 = highest contrast:
15 = lowest contrast
5. With the OK button l you can save the desired setting.
The notice "CONTRAST SETUP" appears again.

Background Illumination

You can set how long the LCD display's q background and
the button illuminations remain alight after completion of the
operation.. Thereby taking into account that the longer the il-
lumination remains lit the shorter the battery life will be.
1. Hold down the S button r for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears.
2. With the  or  button t select "SYSTEM SETUP" and
confirm with the OK button l.
3. With the  or  button t select "BACKLIT SETUP" and
confirm with the OK button l.
4. In the LCD display q now blinks the second count for the
length of time that the light is to be left on which you can
set with the   buttons t from 0 to 60. If you select
"0" the background illumination will shut off completely.
5. With the OK button l you can save the desired setting.
The notice "BACKLIT SETUP" appears again.

Setting the global volume/mute switching

So that you don't always have to first press a device button for
the volume control and mute switching, for these functions the
URC always only responds to an individual device. You can
determine this target device yourself.
- 15 -