Technical Specifications - Vitek VT-2270 BN Die Betriebsanweisung

•
Wipe the unit body with a damp cloth and then
wipe it dry.
•
Clean the air inlet grid (3) with a brush.
•
Never immerse the unit into water or other
liquids.
•
Do not use abrasives and solvents to clean
the unit body.
STORAGE
•
Disconnect the unit from the mains and
clean it.
• Never wind the cord around the hairdryer, as
this may damage the unit. Handle the power
cord with care, do not pull, twist or stretch it,
especially near the power plug or at the junc-
tion point. Straighten the cord periodically if it
gets twisted during hairdryer operation.
•
You can store the hairdryer by hanging it by
the loop (5) provided that no water gets on the
unit in this position.
• Keep the unit away from children in a dry cool
place.
VT-2270.indd 5
DELIVERY SET
Hairdryer – 1 pc.
Concentrator nozzle – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Power consumption: 1200 W
The manufacturer preserves the right to change
the specifications of the units without a prelimi-
nary notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
5
ENGLISH
25.09.2015 16:17:25