Cleaning And Care; Technical Specifications - Vitek VT-2326 VT Die Betriebsanweisung

ENGLISH

CLEANING AND CARE

The hairdryer is intended for house-
hold usage only.
•
•
•
•
•
STORAGE
•
•
•
VT-2326.indd 6
Set the switch (1) to the «0» posi-
tion, disconnect the hairdryer from
the mains and let it cool down.
Wipe the unit body with a damp
cloth and then wipe it dry.
Clean the air inlet grid (4) with a
brush.
Never immerse the unit into water
or other liquids.
Do not use abrasives and solvents
for cleaning the unit body.
Disconnect the unit from the
mains and clean it.
Never wind the power cord around
the hairdryer, as this can dam-
age the cord. Handle the power
cord with care, do not pull, twist
or stretch it, especially near the
power plug or at the junction
point. Straighten the cord periodi-
cally if it gets twisted during haird-
ryer operation.
You can store the hairdryer by
hanging it by the loop (6) provided
that no water gets on the unit in
this position.
•
Keep the unit away from children
in a dry cool place.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Power consumption: 1600 W
The manufacturer preserves the right
to change the specifications of the
unit without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee condi-
tions can be obtained from the dealer
from whom the appliance was pur-
chased. The bill of sale or receipt must
be produced when making any claim
under the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid
down by
Directive 2004/108/ЕС and
to the
Regulation (2006/95/ЕС )
6
the Council
Low Voltage
25.12.2014 10:45:55