Vitek VT-2270 BN Die Betriebsanweisung Seite 4

ENGLISH
of a person who is responsible for their safety
and if they are given all the necessary and
understandable instructions concerning the
safe usage of the unit and information about
danger that can be caused by its improper
usage.
• Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.
•
Do not use the unit if the power cord or plug is
damaged, if the unit works improperly or after
it was dropped.
• Do not repair the unit by yourself. Do not dis-
assemble the unit by yourself, if any mal-
function is detected or after it was dropped,
unplug the unit and apply to any authorized
service center from the contact address list
given in the warranty certificate and on the
website www.vitek.ru.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
USING THE HAIRDRYER
After unit transportation or storage at low
temperature keep it for at least three hours
at room temperature before switching on.
•
Unpack the hairdryer and remove any stickers
that can prevent unit operation.
• Unwind the power cord completely.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
Make sure that the switch (1) is set to the «0»
position.
•
Insert the power plug into the mains socket.
• Use the switch (1) to set the required air sup-
ply speed:
«0» – the hairdryer is switched off;
– low speed and low temperature;
– high speed and high temperature.
Note: During the first operation some foreign
smell and a small amount of smoke from the
heating element is possible, it is normal.
•
This model includes a nozzle (2). Use the nozzle
VT-2270.indd 4
when you need to focus the power of drying in
a small area (for example, to create a curl or a
wave) or when you want to straighten wavy hair.
Hair care
To get the best results, wash your hair with sham-
poo (before drying and styling), dry it with a towel
to remove excessive moisture and comb your hair.
Quick drying
Set the switch (1) to the lowermost position
As you shake off excessive moisture from the hair
with your hand or a comb, constantly move the
hairdryer above your hair.
Styling
Install the nozzle (2) on the hairdryer for directed
air flow, set the switch (1) to the middle posi-
tion .
Divide your hair into locks and create a required
hair style using a round hairbrush. During hair
styling direct the air flow straight onto your hair in
the desired direction.
If necessary, direct the air flow at each lock for
several seconds to fix hair.
Adjust the time necessary for styling locks indi-
vidually according to the hair type.
Nozzle
Attach the nozzle (2) to the unit body. The noz-
–
zle allows directing narrow air flow of high
intensity at the definite lock.
Make sure that the switch (1) is in the «0»
–
position. Plug the hairdryer in. Use the switch
(1) to set the necessary operation mode.
Overheating protection
Overheating protection switches the hairdryer
off if the outgoing air is too hot. If the haird-
ryer is switched off during operation, set the
switch (1) to the «0» position, unplug the hair-
dryer and make sure that the inlets and outlets
are unblocked. Let the hairdryer cool down for
5-10 minutes and switch it on again. Do not block
the air inlets during unit operation and avoid get-
ting of hair into its air inlet.
CLEANING AND CARE
The hairdryer is intended for household usage
only.
•
Set the switch (1) to the «0» position, discon-
nect the hairdryer from the mains and let it
cool down.
4
.
25.09.2015 16:17:25