Installation Of Side Panels - Monuments Edge Montage- Und Gebrauchsanweisung

Installation of side panels

Side panels are optional accessories (Item 30509-3S) and can be mounted if required on
1 - 4 sides. The side panels are not only a decoration element they will also significantly
reduce the radiant heat. This allows the reduction of the side safety gap to 5 cm (Fig. 8).
• First insert the bottom end
tongues of the panel into
the openings in the heater
shell, then put the upper
part over the top edge of
the outer shell (Fig .7).
• Secure each side panel
with 2 supplied screws
(Fig. 7).
• The safety gaps between the heater and the cabin wall, as well as the protective heater
guard rail, the bench and other flammable materials change to 5 cm (see Fig. 8)
34
2
1
Guard rail
5 cm
5 cm
EN
Side panels
Fig. 8
Fig. 7