Connect The Cable(S) - Monuments Edge Montage- Und Gebrauchsanweisung

Mounting of feet
• Remove the enclosed cover of the terminal
box
• Screw in the supplied feet in the corres-
ponding threaded bushes and secure them
with the counter nuts (Fig. 4).

Connect the cable(s)

• Pull the connecting cable(s) through the opening(s) in the terminal box cover panel with
fitted cable gland(s).
• Make connections as per connection diagram (Fig. 5)
• Standard connection diagram is attached on the inner side of the cover panel. Pay attention
to the special connection scheme by 230V 1N connection..
terminal ban
Fig. 5
• Make sure that all wires are properly
secured in the terminals.
• Close the terminal box with cover panel
using the screws. Secure the cable with
the cable gland.
Adjustable feet
threaded feet
mounts
Fig. 4
Fig. 6
EN
33