Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
C
C
C
C
2
F
Technical instructions Pellet tank CPSP and feeder screw CPPT
1
F
12.
insert bolt holdes in the holes on lateral
sides.
C - bolt holder
Mount 4 bolt holders in the holes on lateral sides
of the tank.
13.
Inserting the feeder screw into the
pellet tank.
F - screw M8 x 15 with plastic head
1. pellet tank
2. feeder screw
3. feeding tube
Adjust the feeder screw in the tank by slipping it
through the opening in the door, and through the
holder of the feeder screw. Afterwards, it is
necessary to tighten the feeder screw with the
holder by means of screws with plastic heads. Pull
on the booster pipes over the external feeder pipe.
Assemblage
4x
2x
19
Werbung
