General Data; Delivery Status - ThermoFlux CPSP Technische Anleitung

General data, delivery

1.0. GENERAL DATA

The Pellet tank CPSP and the feeder screw CPPT are constructed for keeping and
transporting the wood pellets. The pellet tank with its feeder screw are constructed and designed
in a modern way. The tank is made out of steel sheet coated by plastic and protecting color after its
final treatment. The storage capacity of the tank can meet needs of the pellet fired boiler according
to its rated thermal output, up to one week time frame. The tank can be placed next to the boiler on
its right or left side.

2.0. DELIVERY STATUS

Pellet tank and screw feeder are deliverd in separet cardboard boxes. In cardboard box of pellet
tank CPSP are also parts for assembly (see point 2.1) while in other box is screw feeder with
feeding tube ready for install in pellet tank CPSP (see point 2.2).
2.1. CONTENT OF THE CARDBOARD BOX
L - PROFILE
OF THE BACK
INNER SIDE
FRONT INNER
SIDE
UPPER
FRONT
SIDE
LOWER
DOOR
12
L - PROFILE
OF THE
FRONT
INNER SIDE
OUTER
BACK
SIDE
Technical instructions Pellet tank CPSP and feeder screw CPPT
LEFT AND RIGHT
INNER SIDE
BACK INNER SIDE
with perforated holes
for fuel level sensor
installation (fuel level
sensor is additional
equipment)
LID
RIGHT
LATERAL OUTER SIDE
LEFT
LATERAL OUTER SIDE
FUNDAMENT
EN