Work Area Safety; Starting Up The Machine - Makita UV3600 Original Bedienungsanleitung

• While operating the machine,
always wear
footwear and long trousers.
Do not operate the machine
when barefoot or wearing open
sandals.

Work area safety

• Keep children and bystanders,
including animals, away while
operating the machine.
• Check the work area whether
there are no stones, wires,
glass, or other foreign objects.
Foreign object may be caught up
or flung by the machine, result in
damage or injury.
• Operate the machine under
good visibility and daylight
conditions only. Do not operate
the machine in darkness or fog.
• Do not operate machine in
explosive atmospheres, such
as in the presence of flammable
liquids, gases or dust. The
machine creates sparks which
may ignite the dust or fumes.
• Do not expose the machine to rain
or wet conditions. Water entering
the machine may increase the
risk of electric shock.

Starting up the machine

• Before connect the plug or
switch on the machine:
– Check the plug and cord and
confirm that they are good
condition.
– Check all the screws, nuts
and other fasteners are
properly secured.
substantial
• If the supply cord is damaged,
• Never use the machine if safety
• When turning on the motor:
– Check cutting tools are in
place and good working
condition.
– Check guards and safe
devices, such as deflectors
or grass catcher, function
well.
– Check the air vents are not
covered by dust or other
foreign materials. Clean
them with a soft brush or
cloth if they are blocked.
– Replace
unreadable labels.
– Check all the parts of
the machine carefully to
determine if it operates
properly and performs its
intended f unction. E specially,
never use the machine if
the switch does not work
normally.
– Make sure the switch is off
side to prevent unintentional
start.
– Check
maintenance,
adjusting wrench or spanner
are removed.
ask Makita authorized service
center to replace it, always use
genuine replacement parts.
device, such as deflector guard
or grass catcher, is damaged or
missing.
– Keep your feet away from
the cutting tools.
– Do not tilt the machine.
damaged
all tools
such
or
for
as
7