Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. PIAB Anleitungen
  4. Pumpen
  5. Lab Vac LVH40
  6. Bedienungsanleitung

PIAB Lab Vac LVH40 Bedienungsanleitung

Vorschau ausblenden
1
2
3
4
5
6
7
8

Werbung

Quicklinks

Diese Anleitung herunterladen
MANUAL
Lab Vac LVH40

Werbung

loading

Verwandte Anleitungen für PIAB Lab Vac LVH40

Inhaltszusammenfassung für PIAB Lab Vac LVH40

  • Seite 1 MANUAL Lab Vac LVH40...

  • Seite 2: (Es) Instalación

    (GB) Installation (DK) Installation (DE) Einbau (ES) Instalación (FR) Installation (IT) Installazione (SE) Installation (FI) Asennus Vacustat Innovators in Vacuum Technology (GB) Connect compressed air to port 1. Connect vacuum hose (not included in delivery). Start the pump. Adjust pressure if necessary (0.4-0.6 MPa, 58-87 psi). (DK) Tilslut trykluft til port 1.

  • Seite 3: Compressed Air Supply

    Compressed air supply Piab LVH40 is designed for a compressed air supply pressure of 0.4-0.6 MPa (58-87 psi). To ensure that the supply pressure to the pump will be correct, it is important for the compressed air lines to be correctly sized. Use at least the sizes specified in the table below.
  • Seite 4 Resistance to solvents Solvents Material Recommended seal and Boiling Vacuum level Formula in pump flap valve material point EPDM Viton (FPM) Kalrez °C mbar* for boiling ® ® seal seal point at 40 °C Acetic acid Acetone N-Amylalcohol Benzene N-Butanol Carbontetrachloride Chlorobenzene Chloroform...
  • Seite 5 (GB) Trouble Shooting (DK) Fejlsøgning (DE) Störfall (ES) Reparación de Averías (FR) En cas de panne (IT) Cattivo funzionamento (SE) Felsökning (FI) Vianetsintä (GB) • Check the feed pressure and blockage or leakage in the vacuum hose. • Disconnect compressed air and dismantle pump house. Take care to check the sequence of assembly and position of gaskets and flap valves.
  • Seite 6 (GB) Spare Parts (DK) Reservedele (DE) Ersatzteile (ES) Piezas de repuesto (FR) Pièces de rechange (IT) Set ricambi (SE) Reservdelar (FI) Varaosat Pos. Art. No. GB / DK / ES / FR / IT / SE / FI 0104948* Spare part kit Lab Vac 40 - 80 0126246** Spare part kit Lab Vac 40 - 80 3216009...

  • Seite 7: (Fr) Garantie

    Piab vakuumpumper har 5 års garanti mod fabrikationsfejl. (IT) Garantien gælder kun vakuumpumperne, men ikke andre La pompa a vuoto Piab ha 5 anni di garanzia contro i difetti omkostninger eller fragtomkostninger. di fabbricazione. La garanzia e’ valida solo per la pompa a vuoto e non copre altri costi.
  • Seite 8 Piab gives you service all over the world. To find your local distributor, please visit www.piab.com. No need to compromise www.piab.com...