Specifications - Makita 6936FD Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Button
1-2. Battery cartridge
2-1. Switch trigger
3-1. Lamp
4-1. Reversing switch lever

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-2:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 3.0 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Explanation of general view
6-1. Bit
6-2. Sleeve
7-1. Bit
7-2. Bit-piece
7-3. Sleeve
Model
Machine screw
Standard bolt
High tensile bolt
-1
)
Overall length
Net weight
Rated voltage
) : 92 dB(A)
pA
) : 103 dB(A)
WA
value (tri-axial vector
2
) : 11.0 m/s
h
2
ENE033-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG102-2
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Cordless Impact Driver
ENG205-1
Model No./ Type: 6936FD
sum)
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
ENG901-1
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
000230
4
14-1. Hooking ends
15-1. Groove in the housing
19-1. Limit mark
20-1. Brush holder cap
20-2. Screwdriver
6936FD
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,600
0 - 3,200
163 mm
2.0 kg
D.C. 18 V
Corporation as the
30th January 2009
Tomoyasu Kato
Director
ENH101-12
responsible