Cleaning And Maintenance; Cleaning The Toilet Bowl; Cleaning The Ash Pan - Separett CINDI Basic Benutzeranleitung

Cleaning and maintenance

Do not spray the toilet with water either internally or externally, as
electrical components and heat insulating materials can be destroyed
by water. If the toilet is exposed to water or other liquids, the toilet or
parts of the toilet may become live!

Cleaning the toilet bowl

Clean the toilet bowl as required. Use a damp cloth and preferably use a cleaning agent for stainless
steel afterwards, as this will create a slippery surface that is dirt-repellent.
Cleaning the ash pan (ASH2)
After 100 uses, the message (ASH2) will appear on the display. Acknowledge the message by pres-
sing and holding the start button for ten seconds or press the arrow down button. Cleaning is carried
out to remove the crystals that form when urine evaporates during incineration. It is also performed
!
because the water vapour cleans the interior of the toilet.
Follow these steps to perform the cleaning:
1. Remove the front cover.
2. Remove the ash pan and empty it.
3. Pour 1 litre of water into the ash pan.
4. Replace the ash pan.
5. Replace the front cover.
6. Run a programme as usual. (Do not use the toilet during cleaning)
1 2
20
!
3