Husqvarna LC 141iV Bedienungsanweisung Seite 13

Use personal protective
•
equipment. See
protective equipment on page
14 .
Do not operate the product in
•
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
Do not operate the product
•
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
Make sure that the blade does
•
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
very high risk that the blade
becomes loose.
If the blade hits an object or if
•
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery (model
LC 141iV and LC 141i) or
disconnect the power cord
(model LC 141C). Examine
the product for damages.
Repair damages or let an
authorised service agent do
the repair.
Never attach the motor brake
•
handle permanently to the
919 - 001 - 19.10.2018
Personal
handle when the motor is
started.
Put the product on a stable,
•
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
Always stay behind the
•
product when you operate it.
Let all the wheels stay on the
•
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
Do not tilt the product when
•
the motor is started.
Be careful when you pull the
•
product rearward.
Never lift up the product when
•
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery
(model LC 141iV and LC 141i)
or disconnect the power cord
(model LC 141C).
Do not walk rearward when
•
you operate the product.
Stop the motor when you
•
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
Do not run with the product
•
when the motor is started.
13