Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Freezer To Its Full Potential - Indesit BIAA 33 F x x Y Gebrauchsanleitung

Kühl-/gefrierkombi
Vorschau ausblenden Andere Handbücher für BIAA 33 F x x Y:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
SHELVES: with or without grill.
Due to the special guides the shelves are removable and the height
is adjustable , allowing easy storage of large containers and food.
Height can be adjusted without complete removal of the shelf.
TEMPERATURE Indicator light*: to identify the coldest area in the
refrigerator.
1. Check that OK appears clearly on the indicator light (see
diagram).
2. If the word "OK" does not appear it means that the temperature is
too high: adjust the REFRIGERATOR OPERATION knob to a
higher position (colder) and wait approximately 10 hours until the
temperature has been stabilised.
3. Check the indicator light again: if necessary, readjust it following
the initial process. If large quantities of food have been added or
if the refrigerator door has been opened frequently, it is normal
for the indicator not to show OK. Wait at least 10 hours before
adjusting the REFRIGERATOR OPERATION knob to a higher
setting.
*
FRESH BOX
This is the new box to keep meat, fish and cheese fresh. When
positioned in the "lower" part of the fridge compartment, it is ideal
for meat and fish; when moved to the "top" part of the fridge, it is
perfect for cheese. It can be taken out of the fridge when it is not
needed.
*
Dual led
Thanks to the powerful light it emits, the new dual LED lighting
system offers a clear view of all foods, with no shadowy areas.
If the LEDs need to be replaced, please contact the Technical
Assistance Service.

Using the freezer to its full potential

• Use the FREEZER OPERATION knob to adjust the temperature
( see Description ).
• Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
• Fresh food that needs to be frozen must not come into contact
with food that has already been defrosted. Fresh food must be
stored in the top FREEZER and STORAGE compartment where
the temperature drops below -18°C and guarantees rapid
freezing.
• To freeze fresh food in the best and safest way possible, activate
the SUPER FREEZE function 24 hours before placing the food in
the freezer. After placing the food inside, activate the SUPER
FREEZE function again; it will be deactivated automatically after 24
hours;
• Do not place glass bottles which contain liquids, and which are
corked or hermetically sealed in the freezer because they could
break.
• The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties located
on the bottom left side of the refrigerator compartment (for
example: Kg/24h: 4).
• In order to obtain a greater amount of space in the freezer
compartment, you may remove the bins (except the lowest bin
and the special COOL CARE ZONE bin, which has an
adjustable temperature) and place the food directly onto the
evaporator plates.
! If the room temperature drops below 14°C for an extended period
of time, the ideal temperature will not be reached in the freezer
compartment and food preservation will be reduced.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer
door. This will help maintain the temperature inside the freezer,
ensuring that foods are conserved for at least 9 -14 hours.
ice tray
Ice
3
The fact that they are situated on the top part of the freezer
drawers ensures greater cleanliness: the ice no longer comes into
contact with the food placed inside the freezer compartment;
furthermore, the dripping of the water during filling is avoided (a lid
to cover up the hole after filling with water is also provided).
1. Pull out the tray by pushing it up. Check that the tray is
ompletely empty and fill it with water through the opening
provided.
2. Take care not to exceed the level indicated (MAX WATER
LEVEL). Excess water prevents the ice cubes from dispensing
(if this happens, wait for the ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments each
mould fills with water ( see diagram ).
4. Close the opening with the lid provided and put the tray back,
placing the top part in the corresponding housing and allowing it
to drop in again.
5. When the ice has formed (minimum time approximately 8 hours)
knock the tray against a hard surface and wet the outside so
that the ice cubes come loose and take them out through the
opening.
*
Varies by number and/or position, available only on certain
models.
GB
MAX
WATER LEVEL
25

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Biaa 34 f x x y

Inhaltsverzeichnis