Telcoma T10 FM400 Gebrauchs- Und Programmierungsanleitung Seite 29

PROGRAMMING OF TRANSMITTERS in LIGHT mode
Programming button
no. of times to press
1
not used
2
not used
3
to delete a code already memorised
4
After having selected the memorise or delete function press the transmitter
button to be memorised or deleted. The flashing Led will remain fixed for
about one second to confirm the successful outcome of the operation.
To reset the entire memory, press the programming button for about 10
seconds, until the LED lights up.
ROLLING-CODE SYSTEM
The FM400 and NOIRE series have rolling-code systems. This provides
an extremely high level of security, since there is no risk of cloning of the
code transmitted.
CAUTION! In the NOIRE series, the Rolling-Code function can be
disabled by removing the jumper F1.
16
Function
To memorise the OPEN button for Light 1 ON/OFF and the CLOSE
button for Light 2 ON/OFF (20 channel transmitter).
To memorise the button 1 for Light 1 ON/OFF and button 2 for Light 2
ON/OFF (2/4 channel transmitter).
GB
29