LG Tone Active HBS-850 Betriebsanleitung Seite 8

How to Use
Pairing
- To use the headset, you must first pair it with your mobile
device. Once the devices have been paired, the headset
will automatically reconnect.
1) Easy Pairing
1. Press and hold the PWR button for 2 seconds to
power on the headset.
2. If it is your first time pairing the device or it does not
detect a previously paired device, it will enter Pairing
mode. The LED indicator will be solid blue.
3. On the device you wish to pair with, find the Bluetooth
menu and search for or add new devices.
4. Select LG HBS850 from the list of devices.
5. If asked for a Pass/Pin Code, enter 0000 (4 zeros).
6. Once the devices are paired, you will hear "Your
headset paired."
NOTE: The headset will automatically power off if not
paired within 3 minutes.
6
2) Manual Pairing (pairing with another phone or
re-pairing)
1. With the power off, press and hold the MFB and the
PWR button at the same time for 2 seconds to enter
Manual Pairing mode.
2. When the headset enters Pairing mode, the LED
indicator will show a solid blue light. Repeat Easy
Pairing steps 3 through 6.
Advanced Multipoint
The headset can be connected to two devices at the same
time. This will give you the freedom to use call waiting
between calls on both of your connected phones.
Pairing with Two Devices
- First, pair the headset with the Bluetooth-enabled mobile
device you want to use as your secondary device (see
Pairing instructions).
- Once paired, power off the headset.
- With the power off, press and hold the MFB and the
PWR button at the same time for 2 seconds. This will
activate Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth-
enabled mobile device. This will be your primary device.