Medion P12313 Bedienungsanleitung Seite 132

Menu Item Setting
TRANS-
PONDER
LNB TYPE
LNB
POWER
Use the arrow button E P G to switch to the
TRANSPONDER column and use the arrow
buttons  to select the transponder for which
you want to start the search. Now press the O K
button to mark the relevant transponder with a
red tick.
ADD
Press the yellow button to add a new transpon-
der. Enter the required value and confirm with
O K or press E X I T to cancel the process.
FRE-
Enter the frequency using the num-
QUEN-
ber buttons.
CY
SYMBOL
Enter the symbol rate using the
(KS/S)
number buttons.
POLARI-
Select the polarity with .
TY
DELETE
Select the transponder that you want to delete as
described above and press the red button. Con-
firm the query with YES.
EDIT
The setting options correspond to those for
ADD.
SCAN
The setting options correspond to those for
SCAN under satellite.
Enter the oscillator frequency for your LNB type
here. The default setting is 09750/10600.
The following UNICABLE SETTINGS can be
made here.
IF
CHAN-
You can set the IF channel here.
NEL
CENTRE
You can set the centre frequency
FREQ
here.
SAT PO- You can set the satellite position
SITION
here.
Set the LNB power here.
DE
EN
47