Manual Mode, Reduced; Off Mode; Automatic Mode; Program Mode - Tempco 51044 Bedienungsanleitung

4.2

Manual mode, Reduced

Press once on the (OK) to turn on the backlight only and a
second time to edit the setting temperature. Then press on
(◄-) or (►+) to start the increment or decrement of the
setting temperature.
The ambient room temperature reappears after a few
seconds.
The Reduced temperature will be followed all the time.
(Default setting 18°C)
4.3

OFF mode

Use this mode if you need to switch off your installation.
Be Careful:
- In this mode your installation can freeze.
- At any time, when display is off, press on the (Ok) key to
display a few seconds the current temperature and time.
- To restart your installation, use the navigation keys (◄-)
and (►+).
4.4

Automatic mode

In this mode your thermostat will follow the program
chosen in the "P" menu (Built-in or customized) according
to the time.
You can easily override, until next program step, the
current setting temperature. To make this, press once on
the (OK) to turn on the backlight only and a second time to
edit the setting temperature "blinking value". You can now
adjust the setting with (◄-) or (►+).
The small hand
function is active.
The override function will be stopped after the next step of
the program.
4.5

Program Mode

logo will be displayed when override
14