Parameter's Menu - Tempco 51044 Bedienungsanleitung

Parameter's menu

6
Your thermostat has a parameter's menu, in order to enter
in this menu, press and maintain the (◄-) and (►+) during
5sec. Then the following screen must appear:
Now you can select a parameter which must be adjusted
with the navigation keys (◄-) or (►+), once the parameter
chosen, toggle the value with the (OK) key, modify it with
(◄-) or (►+) and confirm your adjustment with (OK).
To leave the parameter menu, choose the parameter
« End » and press (OK).
N°
Names
00 Ini rF
01 DEG
02 SEnS
Description
Radio configuration mode (see the
corresponding section)
Type of degrees
displayed
Selection of the
sensor which will
be used for the
regulation.
The listing of the
following
parameters will be
different in
function of this
parameter.
22
Default -
setting possibility
°C: Celsius degrees.
°F: Fahrenheit
degrees.
Air: ambient sensor
only
Flr: External (floor)
sensor only.
FLL.1: ambient sensor
with lower and upper
floor limitation.
FLL.2: ambient sensor
with intelligent lower
floor limitation.
- The two following
parameters must be
use only with the
special receiver
Cb.1: Combined
function (Ambient and
floor regulation)
Cb.2: Combined
function (Ambient and
floor regulation)
Other