Starting - Tempco 51044 Bedienungsanleitung

The 1 zone RF clock is now installed. To test this, increase
the setpoint temperature in "Auto" mode at 30 ° C. The
corresponding zone must switch during 5 sec. When the
temperature decreases, the zone switch one more time.
For a quick installation, put the clock near the receiver. A
distance of 50cm minimum must be respected between the
clock and the receiver.
3.5

Starting

The clock is now ready to works.
The default working mode will be automatic
standard built-in program "P1" for all the zones.
Monday to Friday
20°C
18°C
07:00
Saturday & Sunday
20°C
18°C
08:00
Note:
You can customise your program as you want, See the
next part "Working mode definition" chapter "Zone
Program" for more explanation.
09:00 17:00
12
23:00
23:00
with a