Use And Maintenance; Basic Information - Uvex boss 525 bt Bedienungsanleitung

Qualifi ed technicians
Only qualifi ed technicians can install this product or carry out technical
assistance.
Accessories and batteries
Use only approved accessories and batteries. Do not connect
incompatible devices.
24
ENGLISH

2 USE AND MAINTENANCE

2.1 Basic Information

The UVEX BLUETOOTH is extremely user-friendly. All system commands are made
by pressing one of the two buttons located on the outside of the helmet next to the
microphone arm. Every action is confi rmed by a specifi c audio tone and LED signal.
Each button can be operated by pressing in different
ways, each of which is recognised by the system:
- short: press and release immediately
- medium: press for around 2 seconds until the fi rst tone
- long: press for around 4 seconds until the double tone
Led
Helmet Headset
is heard.
- pairing: press the button with "helmet" icon for around
7 seconds until you hear the tone and the LED fl ashes rapidly.
Three different LED signals identify the different states of the system.
Steady light: the system has been switched on or off
Rapid fl ashing: the system is in pairing mode and is trying to connect the helmet with
another helmet or a compatible bluetooth device.
Slow fl ashing: the system is operational.
To enable communication between the two helmets they must be paired – in other
words, they should be "introduced" to one another and mutually recognised.
The following pairing procedure must also be followed to enable the helmet to
®
communicate with a Bluetooth cellphone, MP3 player or GPS system.
ATTENTION: do not carry out the pairing process when driving.
A helmet can be paired as a Master or Slave. The Master and Slave helmets feature
totally identical functions.
The important difference between pairing as Master or Slave is in intercom function between
driver and passenger - when the system is switched on only the Master helmet seeks the
second helmet, previously paired as Slave, automatically establishing a connection.
A helmet already paired as Master can still also be paired as Slave and the reverse.
Simply repeat the pairing procedure.
Every helmet with the UVEX BLUETOOTH system can be paired repeatedly with any
other helmet equipped with same system.
25
ENGLISH