Intended Use; Safety Information; Storage, Cleaning - Zoofari 317339 Aufbauanleitung

Congratulations!
You have chosen to purchase a high-quality item.
Familiarise yourself with the item before using it
for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Only use this item in the manner described and
for the purpose for which it is intended. Store
these assembly instructions carefully. When
passing the item on to third parties, please also
hand over all accompanying documents.
Package contents/parts list
(Fig. A)
1 x baseplate (1)
1 x shelf, L-shaped (2)
1 x shelf (3)
1 x lying area, straight (4)
1 x set of steps (5)
1 x lying area, round (6)
1 x cat den, small (7)
1 x cat den, large (8)
4 x sisal column, 47cm (9)
1 x sisal column, 33.5cm (10)
2 x column, fur, 33.5cm (11)
2 x column, fur, 47cm (12)
1 x sisal column with screw, 48.5cm (13)
4 x screw thread (14)
1 x M8 screw, 70mm (15)
4 x M8 screw, 50mm (16)
6 x M8 screw, 40mm (17)
1 x M8 screw, 20mm (18)
5 x cover cap (19)
1 x Allen key (20)
1 x assembly instructions
Technical data
Total dimensions: approx. 50 x 182 x 68cm
(W x H x D)
Maximum load: 6kg
6
Date of manufacture (month/year):
06/2019

Intended use

The item serves as an indoor scratching post for
cats. The item is not intended for commercial use.

Safety information

Important: read these assembly instruc-
tions carefully and keep them in a safe
place!
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffoca-
tion.
• The item is not a toy or a climbing apparatus!
Ensure that persons, especially children, do
not stand on the item or pull themselves up on
it. The item may fall over.
Risk of injury!
• Make sure the item is properly stabilised
before use!
• Place the item on a level and solid surface. Do
not place it near stairs.
• Do not place hazardous items like candles on
or near the item.
• Check the item regularly for wear. Check
regularly to make sure all screws are tight!
Only use the item if it is in perfect condition!
• The item may only be used for its intended
purpose.
• Do not exceed the maximum load capacity.
Assembly (Fig. B)
1. Remove the packaging and lay out all the
parts of the item on the floor.
2. Assemble the item according to Fig. B.
Note: to reduce the risk of the item tip-
ping over, the item can be placed with
its back against a wall.

Storage, cleaning

Always store the item clean and dry at room
temperature when not in use. Only vacuum the
item.
IMPORTANT! Never clean the item with harsh
cleaning agents.
GB/IE 5