Serial; (Default = 0) - Agilent Technologies TwisTorr 74 FS AG Bedienungshandbuch

N. Read/ Write
406 R
407 R
500 Reserved for Agilent service
503 R/W
504 R/W
1.
NOTE
opened with a delay defined by window No. 126; when the controller starts, the
vent valve is closed imme-diately.
2.
window No. 122.
Figure 28
TwisTorr 74 FS AG On-board Controller User Manual / 87-901-054-01
Data Description
Type
A Program Listing Code
A Parameter Listing Code
N RS 485 address
L Serial type select
Automatic means that when the controller stops, the vent valve is
On command means that the vent valve is opened or closed by means of
7 6
TOO HIGH LOAD
SHORT CIRCUIT
OVERVOLTAGE
Window No. 206 Bit Description
Technical Information
5 4 3 2 1
PUMP OVERTEMP.
CONTROLL. OVERTEMP.
Description
Permitted Values
"XXXXXXXXXX"
"XXXXXXXXXX"
0 to 31

(default = 0)

0 = RS-232
1 = RS-485
(default = 0)
0
NO CONNECTION
185/192
17