Replace A Tpu Air Tube - Westfield HYDRA 300 Anleitung

REPLACING A TPU AIR TUBE
Replacing or Repairing an Air Tube
Deflate the air tube fully. NEVER replace
or repair a tube before deflating it fully.
Break the plastic ties on the sleeve of the
air tube and unzip the sleeve. Then
remover the protective cover and air tube
from inside the sleeve. Break the plastic
ties on the protective cover and unzip the
protective cover. Remove the TPU blader
from inside the protection cover.
Now simply replace the tube, place inside
the protective cover being careful to
ensure that is not twisted as a twist in the
bladder could cause damage when it is
inflated. Once the tube has been fitted zip
the protective cover shut. YOU MUST
THEN RELOCK THE ZIPS WITH NEW
PLASTIC TIE OR SIMILAR SOLUTION. If
you do not relock the zips then you could
well cause damage to your awning when it
is inflated.
4