PITCHING INSTRUCTIONS (OPTIONAL)
O1
Adding pole
Storm Roof Pole
• Assemble the storm roof pole as shown in the diagrams above.
• Insert the pole into its pocket and extend into the opposite pocket.
• Do not over tension the pole.
O2
Adding inner tent
Inner Tent
• This should only be done once the awning has been pitched and pegged.
• Take the inner tent out of its bag and lay it on the ground inside the awning.
• Attach each of the colour coded toggled straps to their corresponding o-rings in the roof of
the awning (for example connect the toggle on the red strap is attached to the o-ring on the
red strap in the roof of the awning).
• Clip each bottom corner of the inner tent to the o-ring located on the groundsheet.
OPTIONAL
OPTIONAL
1
2
8