Clock/Timer; Clock Setting; Displaying The Time; Timer Setting - Philips mc 145 Benutzerhandbuch

CLOCK/TIMER

SE LE CT
SO UR CE
SHU FFL E
SID E A/B
PR OG RA
M
DS C
INC RED IBL
E SUR ROU
ND
DB B
TU NI NG

Clock setting

You may set the clock by using a time signal which is
broadcast with RDS stations. This only works if the RDS
station is sending this signal.
Automatic clock setting
1 Tune to an RDS station (see "RADIO").
2 Keep CLOCK/TIMER on the unit pressed for more than
2 seconds.
SEARCH RDS TIME is displayed for a maximum
of 90 seconds. Then the time is displayed.
Note: If NO RDS TIME is displayed, no time signal has
been received. In that case you will have to set the
clock manually.
8
Manual clock setting
1 Switch to standby.
2 Press CLOCK/TIMER on the unit.
The clock digits flash.
3 Press 5 TUNING 6 on the unit to set the hour.
RDS /NE WS
TAP E COU
NTE R
4 Press 4 PRESET 3 on the unit to set the minutes.
BAN D
TIM ER ON /OF
F
5 Press CLOCK/TIMER on the unit to confirm the settings.
CLO CK/ TIM
ER

Displaying the time

• When the unit is switched on, press CLOCK/TIMER to
switch the time display on and off.

Timer setting

You may use the unit as an alarm clock, with the CD, tuner
or tape switching on at a set time.
1 Adjust the volume to be used for the alarm.
2 Switch to standby.
3 Keep CLOCK/TIMER on the unit pressed for more than
2 seconds.
flashes and the actual source is displayed.
TIMER
4 Press SELECT SOURCE on the unit to select the desired
sound source: CD, TUNER or TAPE.
Note: REC TUN is only used for a timed recording. See
"TAPE DECK" for details.
5 Press CLOCK/TIMER on the unit to confirm the source.
The symbol of the source and ON is displayed, the
clock digits flash.
6 Press 5 TUNING 6 on the unit to set the desired hour
and 4 PRESET 3 to set the desired minute.
7 Press CLOCK/TIMER on the unit to confirm the settings.
is shown and the timer is armed.
TIMER
Note: If more than 90 seconds elapses without a button
being pressed, the unit quits the timer setting mode.
Timer deactivation and activation
• Press TIMER ON/OFF during standby, to switch the timer
off and on.
If the timer is armed is shown.
TIMER