Record Timer - Philips mc 145 Benutzerhandbuch

SH UF FL E
SI DE A/ B
PR O G RA
M
D SC
TU N IN G
Recording from the CD player
(CD SYNCHRO)
1 Press SELECT SOURCE repeatedly to display CD.
2 Insert a CD and, if desired, program track numbers.
3 Press PUSH to open the cassette compartment.
4 Insert a blank, unprotected cassette and close the
cassette compartment.
• You can choose the cassette side(s) A, B or A+B by
pressing REVERSE MODE. When selecting A+B the
cassette sides are switched automatically at the end of
the tape. CD playback is paused during the side switch.
5 Press CD SYNCHRO RECORD on the unit.
Recording starts. CD play starts 7 seconds later, to let
the leader tape pass the recorder heads.
Note: If the first track to be recorded is chosen by ∞ or
§ , CD playback and tape recording start
simultaneously.
6 Press 9 (STOP 9 on the remote control) to stop
recording.
Note: If RECORD is pressed during CD playback, recording
starts immediately (use 2; to pause CD playback).

Record Timer

IN CR ED IB LE
SU RR OU ND
D B B
You may record from the radio at a set time. You have to
define a preset radio station to record from, a start time
and a stop time. You can choose the cassette side(s) A, B
or A+B by pressing REVERSE MODE.
1 Select the preset radio station to record from.
2 Switch to standby.
3 Keep CLOCK/TIMER on the unit pressed for more than
2 seconds.
flashes and the actual source is displayed.
TIMER
4 Press SELECT SOURCE repeatedly to display REC TUN.
5 Press CLOCK/TIMER on the unit to confirm the source.
ON is displayed,
6 Press 5 TUNING 6 on the unit to set the desired hour
and 4 PRESET 3 to set the desired minute.
7 Press CLOCK/TIMER on the unit to confirm the start time.
OFF is displayed,
8 Press 5 TUNING 6 on the unit to set the desired hour
and 4 PRESET 3 to set the desired minute.
9 Press CLOCK/TIMER on the unit to confirm the settings.
is shown and the recording timer is set.
TIMER
and the clock digits flash.
RECORD
and the clock digits flash.
RECORD
Tape deck maintenance
To ensure proper recording and playback quality, clean
parts A, B and C after approx. 50 hours of operation.
Use a cotton swab slightly moistened with alcohol or
head-cleaner fluid.
Press 2; and clean the rubber pressure rollers A. Press
2; again and clean the capstans B and the heads C.
Note: The heads C can also be cleaned by playing a
cleaning tape once.
B A C
TAPE DECK
A B
15