Usb/Sd Operation - oneConcept 10006663 Bedienungsanleitung

REPEAT MODE
When the REPEAT BUTTON is pressed once, the REPEAT 1 Indicator, 'REP 1', will appear in
the LCD DISPLAY. The current track will be played repeatedly. When the REPEAT BUTTON is
pressed twice, the REPEAT INDICATOR, "REP ALL" will light in the LCD DISPLAY. The whole
disc will be played continuously. To Cancel Repeat Function: Press the REPEAT BUTTON until
the repeat indicator is off.
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP FORWARD or SKIP BACKWARD BUTTON to go
to the next track or go back to the beginning of the current track.
2. During playback, press and hold the SEARCH FORWARD or SEARCH BACKWARD buttons
to search within the current track with audible high speed playback.
PROGRAM PLAY MODE (Note: Program can only be set in STOP mode.)
1. Press the PROG BUTTON once. Both the Program No, "01", and PROGRAM INDICATOR,
"PROG" will flash in the DISPLAY.
2. Press the SKIP FORWARD or SKIP BACKWARD BUTTON to select the track to be programmed.
3. Press the PROGRAM BUTTON again to store the selection. The Program No. will advance to
"02" and flash together with the PROGRAM INDICATOR "PROG" to prompt for the next input.
4. Press the SKIP FORWARD or SKIP BACKWARD BUTTON to select the track to be programmed.
5. Press the PROGRAM BUTTON again to store your second selection.
6. Press the PLAY/PAUSE BUTTON to complete and start program play in the programmed
sequence.
7. You may tap SKIP FORWARD BUTTON to go directly to other tracks ahead during program
play and press SKIP BACKWARD BUTTON twice to go back to previous track(s).
8. You may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all
tracks in the program (Repeat All).
9. The Player will stop when all the programmed tracks have been played through once. To
replay program play, press the PROGRAM Button followed by the PLAY/ PAUSE Button.
10. To cancel program play, press the STOP BUTTON twice while program play is running.
11. Press ALBUM Bottom to choose the album.
12. To turn the Player off, press the STAND-BY BUTTON. The LCD DISPLAY backlight will go
"off".
1. Choose the USB/SD mode and insert an USB- or SD device.
2. Press the MODE Button SHIFT button to rotate through the CD, USB res. SD playing
modes. The display will prompt "USD" or "SD" when the respective mode is active.
3. The use of the repeat, programming, skip, search und album functions equals the sche-
me outlined for the CD mode.
4. There is no option to set an USB or SD device as the source of the alarm.
16

USB/SD Operation