Usb/Sd Operation; Aux Operation - oneConcept 10006663 Handbuch

PROGRAM PLAY MODE
Note: Program can only be set in STOP mode.
1. Press the PROG BUTTON once. Both the Program No, "01", and PROGRAM INDICATOR,
"PROG" will flash in the DISPLAY. Press the SKIP FORWARD or SKIP BACKWARD BUTTON
to select the track to be programmed.
3. Press the PROGRAM BUTTON again to store the selection. The Program No. will advance to
"02" and flash together with the PROGRAM INDICATOR "PROG" to prompt for the next input.
4. Press the SKIP FORWARD or SKIP BACKWARD BUTTON to select the track to be pro-
grammed. Press the PROGRAM BUTTON again to store your second selection.
6. Press the PLAY/PAUSE BUTTON to complete and start program play in the programmed
sequence. You may tap SKIP FORWARD BUTTON to go directly to other tracks ahead during
program play and press SKIP BACKWARD BUTTON twice to go back to previous track(s).
8. You may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all
tracks in the program (Repeat All).
9. The Player will stop when all the programmed tracks have been played through once. To
replay program play, press the PROGRAM Button followed by the PLAY/ PAUSE Button.
10. To cancel program play, press the STOP BUTTON twice while program play is running.
11. Press ALBUM Bottom to choose the album. To turn the Player off, press the POWER BUT-
TON. The LCD DISPLAY backlight will go "off".
1. Choose the CD mode and insert an USB- or SD device.
2. Press the CD/USB/SD SHIFT button to rotate through the CD, USB res. SD playing mo-
des. The display will prompt "USD" or "SD" when the respective mode is active.
3. The use of the repeat, programming, skip, search und album functions equals the sche-
me outlined for the CD mode.
4. There is no option to set an USB or SD device as the source of the alarm.
You can play other music sources (iPod, MP3 player or other digital audio player) through
the speakers of this System by connecting the AUX IN Jack to your external player's LINE
OUT jack or headphone jack.
1. The AUX IN and PHONES JACKS are covered by the DOOR (#16). Slide the DOOR downwards
2. Plug one end of an audio cable (Not included) into the AUX IN Jack and the other end of
the cable to the line out or headphone jack of your digital audio player.
3. Set the FUNCTION SELECTOR to the "AUX" position.
4. Press the POWER BUTTON to turn on the System. The LCD DISPLAY goes "On".
5. Play your digital audio player.
6. Adjust the VOLUME on the external audio player and the System until you reach a com-
fortable listening level.
7. Turn the System and your audio player off when you have finished listening and unplug
the audio cable.

USB/SD Operation

AUX Operation

15