Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RADIO
LISTENING TO THE RADIO
MANUAL TUNING
1. Press
button to select desired BAND (AM or FM).
BAND
2. Tune to the required station by pressing the
3. Adujst volume control to the desired volume level.
AUTO TUNING
1. Press
button to select desired band (AM or FM).
BAND
2. Press and hold the
3. The unit will start scanning automatically and stops when a radio station is reached.
4. Repeat steps 3 & 4 until a desired radio station is reached.
5. Adjust volume control to a desired volume level.
PRESET STATIONS BY REMOTE HANDSET
You can store up to a total of 40 radio stations in the memory (30-FM / 10-AM).
1. Set to TUNER mode.
2. Turn to the desired radio station by "MANUAL" or "AUTO" tuning methods.
3. Press
button to enable programming state.
PROGRAM
4. Press
or
MEM+
MEM-
5. Press
button again to confirm the setting.
PROGRAM
6. Repeat steps 2 to 5 to store other stations.
7. Press
or
MEM+
MEM -
8. To return to normal tuner mode, leave the keys alone.
HINTS FOR BEST RECEPTION:
AM: The receiver has a built-in AM ferrite antenna. If the AM reception is weak, rotate or
reposition the unit. This usually improves the AM reception.
FM: Attached FM wire antenna plugged in at the rear of the unit should be fully unwound and
extended its full length for best reception.
24
or
button for 1 - 2 seconds and then release.
button to select the desired station memory for storage.
button to reload the preset stations in order.
or
button.
Werbung
Inhaltsverzeichnis
