Telcoma FM420 Gebrauchs- Und Programmierungsanleitung Seite 38

GB
- Channel 00 repetitionThis new multi-channel control enables
programming of channel 00 so that it repeats transmission sequentially for
a set time interval.
This function is useful when channel 00 is optimised for centralised
commands, and repetition optimises reception of the radio signal.
Press key 5 to select
Use key 2 (indicated in the drawing) or 4 to scroll through values
00 to 40.
Select 00 to disable transmission repetition.
Select 10, 20, 30 or 40 to set the repetition interval in seconds.
Press key 5 to confirm. The text
control returns to normal operating status.
In this case (30) channel 00, after pressing a transmission key, is
transmitted at regular intervals for 30 seconds.
transmission, the text
key 1 or 3 to interrupt transmission repetition.
To disable repeated transmission of channel 00, set
menu
- CETAP control unit compatibility (for EDGE20 only)
To enable recognition of the central key (5) as a STOP key on the CETAP
control unit, enter the menu and proceed as follows:
Press key 5 to select
38
.
appears briefly and the radio
is displayed, followed by
On each
. Press
in the