Telcoma FM420 Gebrauchs- Und Programmierungsanleitung Seite 35

GB
Use key 1 or 3 (indicated in the drawing) to scroll through to the
flashing
Use the central key to confirm
The channel will start flashing.
Use key 3 (indicated in the drawing) or 1 to scroll through the
channels to
Press key 2 to add the channel 02 to C2. The dot next to 2 will light
up ( ).
To remove it from C2 press key 4, and the dot next to 2 will turn off
( ).
If a dot is lit next to 0 ( ), this means that channel 02 also
belongs to group C1.
Use key 3 (indicated in the drawing) or 1 to scroll through the
channels to
Press key 2 to add the channel 15 to C2. The dot next to 5 will light
up ( ).
To remove it from C2 press key 4, and the dot next to 5 will turn off.
35