Control System Led Studio - EuroLite LSD-100 Bedienungsanleitung

7.2 Control system LED Studio

7.2.1 Installation of the control software
After completing the data cabling of the display panels and establishing an ethernet connection, install the
control software LED Studio on your computer. For this purpose, insert the supplied CD into your CD-ROM
drive. The installation start window will be displayed. Select English and Installing LED play software and
follow the instructions of the installation program.
Note: The CD starts running automatically if auto start mode is enabled for your CD-ROM drive. If this is not
the case open the CD and start the installation program LEDStudioD8.exe.
7.2.2 Configuration of the control software
The control software must be configured for use with the display panels, sending card and network interface.
For this purpose, start the program and call menu item Option Software Setup.
7-7 Calling the configuration menu
The following software configuration menu is shown:
7-8 Software configuration menu
1. Now type the password linsn on the keyboard (observe the correct spelling) – notice there is no field or
indication on the screen – and press Enter.
53/62 00049757.DOC, Version 1.1